28/4/15

GPIO-HSTC Card - Tấm mạch in - Terasic


Interface Conversion
  • [THDB-HTG(F)] GPIO-HSTC Card - Part No: P0024  
  • [THDB-HTG(M)] GPIO-HSTC Card - Part No: P0033  
  • Đơn giá:  Liên hệ
  • Xuất sứ: Taiwan.
  • Tên sản phẩm: GPIO-HSTC Card
  • Tấm mạch in đã được lắp ráp hoàn chỉnh dùng cho giao tiếp với các thiết bị phát triển. 
  • Nhà sản xuất: Terasic. Hàng mới 100%.
  • Liên hệ: 0935 408 286 or 0934 993 253
Overview
Kit Board Mạch Phát Triển

The HTG Card is designed to convert a High-Speed Terasic connector (HSTC) or a High-Speed Mezzanine connector (HSMC) I/Os to three 40-pin expansion prototype connectors, which are compatible with Altera DE3/DE2-115/DE2/DE1/DE0 expansion headers. Users can connect up to three Altera DE3/DE2-115/DE2/DE1/DE0 boards (or associated daughter cards) onto a HSTC/HSMC-interfaced host board via a HTG Card.

Specification
  • Convert HSTC/HSMC-interfaced I/O to standard 40-pin expansion connectors.
  • Allow users to connect Altera DE3/DE2-115/DE2/DE1/DE0 boards to a HSTC/HSMC-interfaced host board.
  • Provide test points for signal measurement
Block diagram



HTG
  • Connect HTG with Altera Cyclone III Starter Board

  • Connect HTG with Altera DE3
Note. An adapter (SFF or HFF) is required to connect ADA-HSMC with DE3. It is bundled in DE3 kit.

  • Connect HTG with Altera DE4
Note. One adapters (HFM2) required to connect DVI-HSMC with DE4. They are bundled in DE4 kit.

  • Connect HTG with Altera DE2-115
Resources

Documents
TitleVersionSize(KB)Date AddedDownload
THDB-HTG User Manua1.0.311502011-07-20

Kit Contents
  • One HTG Card



HotLine: 0935.408.286 or 0934 993 253
Skype: linhkienmach
 Email: linhkienmach@gmail.com
Fanpage: Linh Kiện Mạch - Mạch Thí Nghiệm FPGA

23/4/15

Atlys™ Spartan-6 FPGA Development Board


Linh Kiện Mạch - Mạch Thí Nghiệm FPGA
Part: 410-178P-KIT
  • Đơn giá:   7.900.000 VND
  • Xuất sứ: Taiwan.
  • Tên sản phẩm: Atlys™ Spartan-6 FPGA Development Board
  • Tấm mạch in đã được lắp ráp hoàn chỉnh dùng cho thiết bị phát triển hệ thống nhúng trên FPGA. 
  • Nhà sản xuất: Digilent. Hàng mới 100%.
  • Liên hệ: 0935 408 286 or 0934 993 253

IC: Xilinx Spartan®-6 LX45 FPGA in a 324-pin BGA package
Connector(s):
One Vmod™ (high-speed VHDC) connector
One 12-pin Pmod™ connector
One RJ-45 connector for 10/100/1000 Ethernet PHY and RS-232 serial
Two HDMI video input ports & two HDMI output ports
Two on-board USB2 ports for programming & data transfer
AC-97 audio with line-in, line-out, mic, & headphone
Programming:
JTAG programming interfaces compatible with Xilinx's iMPACT™ and Digilent Adept™
  • Xilinx Spartan-6 LX45 FPGA, 324-pin BGA package
  • 128Mbyte DDR2 16-bit wide data
  • 10/100/1000 Ethernet PHY
  • On-board USB2 ports for programming & data transfer
  • USB-UART and USB-HID port (for mouse/keyboard)
  • Two HDMI video input ports & two HDMI output ports
  • AC-97 Codec with line-in, line-out, mic, & headphone
  • Real time power monitors on all power rails
  • 16Mbyte x4 SPI Flash for configuration & data storage
  • 100MHz CMOS oscillator
  • 48 I/O’s routed to expansion connectors
  • GPIO includes 8 LEDs, 6 buttons, & 8 slide switches
  • Ships with a 20W power supply and USB cable

The Atlys circuit board is a complete, ready-to-use digital circuit development platform based on a Xilinx Spartan 6 LX45 FPGA. The on-board collection of high-end peripherals, including Gbit Ethernet, HDMI Video, 128Mbyte DDR2 memory array, audio and USB ports make the Atlys board an ideal host for complete digital systems built around embedded processors like Xilinx’s MicroBlaze. Atlys is fully compatible with all Xilinx CAD tools, including ChipScope, EDK, and the free WebPack, so designs can be completed with no extra costs.

Linh Kiện Mạch - Mạch Thí Nghiệm FPGA
The Spartan-6 LX45 is optimized for high-performance logic and offers:
  • 6,822 slices each containing four 6-input LUTs and eight flip-flops
  • 2.1Mbits of fast block RAM
  • 4 clock tiles (8 DCMs & 4 PLLs)
  • 6 phased-locked loops
  • 58 DSP slices
  • 500MHz+ clock speeds
The Atlys board can be communicated with and programmed by the Digilent Adept software. In addition, the board can be programmed by Xilinx's iMPACT using the Digilent Plugin for Xilinx Tools.

The required USB-UART driver is available for free download from Exar.

Linux developers: The Atlys board is supported by PetaLinux SDK for an out-of-the-box embedded Linux solution.

Linh Kiện Mạch - Mạch Thí Nghiệm FPGA


Digilentinc

1/12/14

Ngành công nghiệp vi mạch Việt Nam với nhiều kỳ vọng mới!


Bộ Công Thương vừa trình Thủ tướng Chính phủ phê duyệt chủ trương đầu tư cơ chế, chính sách ưu đãi đối với dự án nhà máy sản xuất vi mạch (chip điện tử) của Tổng công ty Công nghiệp Sài Gòn.

Ngành công nghiệp vi mạch Việt Nam với nhiều kỳ vọng mới!

Việc tự sản xuất các vi mạch sẽ góp phần nâng cao giá trị sản phẩm điện tử của Việt Nam

CôngThương - Nền móng cho công nghiệp vi mạch

Là dự án sản xuất vi mạch đầu tiên của nước ta, dự án nhà máy sản xuất vi mạch có vị trí trung tâm trong việc hình thành hệ sinh thái ngành công nghiệp sản xuất vi mạch điện tử của khu vực TP. Hồ Chí Minh và rộng hơn là Việt Nam. Bên cạnh đó, sản phẩm quốc gia vi mạch điện tử chỉ có thể phát triển khi nhà máy sản xuất vi mạch của doanh nghiệp (DN) trong nước đi vào hoạt động. Do đó, dự án cũng được kỳ vọng sẽ trở thành trung tâm để thực hiện các dự án KHCN trong nước, làm chủ công nghệ thiết kế, chế tạo sản phẩm vi mạch điện tử cũng như triển khai những kết quả nghiên cứu về vi mạch điện tử vào thực tế trên quy mô công nghiệp.

Riêng về vấn đề nhân lực, dự án đi vào hoạt động sẽ là trung tâm đầu tiên tại Việt Nam có môi trường thực tiễn phục vụ đào tạo, thực tập, nghiên cứu, nâng cao trình độ cho đội ngũ các nhà khoa học, kỹ sư, sinh viên. Trong tương lai, đội ngũ này sẽ góp phần phục vụ các mục tiêu về phát triển nguồn nhân lực chất lượng cao của ngành công nghiệp điện tử nói chung, ngành công nghiệp sản xuất vi mạch nói riêng.

Sản phẩm chiến lược của Dự án bao gồm chip RFID, chip năng lượng (power IC) và chip điện tử thông dụng (vi điều khiển 8, 16, 32 bit...). Đến năm 2020, dự án được kỳ vọng sẽ cung cấp các sản phẩm đòi hỏi mức độ bảo mật thông tin cao như thẻ định danh cá nhân, thẻ ngân hàng, hệ thống quản lý khí tài quân sự... Sau năm 2020, dự án sẽ từng bước đáp ứng nhu cầu về thiết kế, chế tạo các sản phẩm vi mạch cho thiết bị, khí tài quân sự.

Cần thêm hỗ trợ

Theo Bộ Công Thương, dự án có tổng mức đầu tư trên 5.300 tỷ đồng và sẽ hoàn vốn sau khoảng 9 năm đi vào hoạt động. Tuy nhiên, đây là một lượng vốn khá lớn vì vậy chủ đầu tư dự án kiến nghị, cho phép dự án được vay tín dụng đầu tư phát triển 60% tổng mức đầu tư dự án (tương đương gần 3.200 tỷ đồng) từ Ngân hàng phát triển Việt Nam với lãi suất ưu đãi theo quy định và hỗ trợ toàn bộ lãi suất vay trong thời hạn 5 năm. Chủ đầu tư cũng kiến nghị được hỗ trợ kinh phí làm chủ, thích nghi và chuyển giao công nghệ, trang thiết bị phòng thử nghiệm theo Chương trình phát triển một số ngành công nghiệp công nghệ cao.

Về thuế, chủ đầu tư kiến nghị được nộp chậm trong thời hạn một năm 60% thuế tiêu thụ đặc biệt phải nộp trong năm 2015 (1.501 tỷ đồng); được miễn thuế nhập khẩu, thuế giá trị gia tăng theo quy định hiện hành đối với các trang thiết bị nhập khẩu của dự án, nguyên vật liệu phục vụ cho sản xuất thử nghiệm, hoạt động nghiên cứu và phát triển; được áp dụng thuế suất thu nhập DN là 10% trong 30 năm, miễn thuế trong 4 năm và giảm 50% số thuế phải nộp trong 9 năm tiếp theo.

Bộ Công Thương cho biết, Dự án Nhà máy sản xuất vi mạch của Tổng công ty công nghiệp Sài Gòn là dự án tiên phong trong ngành công nghiệp sản xuất vi mạch tại Việt Nam. Khi đi vào hoạt động, dự án sẽ có tác động lan tỏa đến các ngành công nghiệp điện tử khác, đồng thời góp phần nâng cao năng lực khoa học công nghệ quốc gia.

Lan Phương ( Báo baocongthuong)

29/11/14

Kit SoCKit - the Development Kit for New SoC Device

(Cyclone V Starter Kit)
  • Mã hàng: P0160.
  • Đơn giá:    (Academic)
  • Liên hệ: 0935 408 286 or 0934 993 253
  • Tên hàng: SoCKit - the Development Kit for New SoC Device 
  • Nhà sản xuất: Terasic. Hàng mới 100%.
  • Xuất sứ: Taiwan.
  • Tấm mạch in đã được lắp ráp hoàn chỉnh dùng cho thiết bị phát triển hệ thống nhúng trên FPGA

Overview

The SoCKit Development Kit presents a robust hardware design platform built around the Altera Cyclone V System-on-Chip (SoC) FPGA, which combines the latest Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system. Altera’s SoC integrates an ARM-based hard processor system (HPS) consisting of processor, peripherals and memory interfaces tied seamlessly with the FPGA fabric using a high-bandwidth interconnect backbone. The SoCKit development board includes hardware such as high-speed DDR3 memory, video and audio capabilities, Ethernet networking, and much more. In addition, an on-board HSMC connector with high-speed transceivers allows for an even greater array of hardware setups. By leveraging all of these capabilities, the SoCKit is the perfect solution for showcasing, evaluating, and prototyping the true potential of the Altera SoC.

Specification
FPGA Device
  • Cyclone V SX SoC—5CSXFC6D6F31C6N
  • 110K LEs, 41509 ALMs
  • 5140 M10K memory blocks
  • 6 FPGA PLLs and 3 HPS PLLs
  • 2 Hard Memory Controllers
  • 3.125G Transceivers
ARM®-based hard processor system (HPS)
  • 800 MHz, A Dual-Core ARM Cortex™-A9 MPCore™ Processor
  • 512 KB of shared L2 cache
  • 64 KB of scratch RAM
  • Multiport SDRAM controller with support for DDR2, DDR3, LPDDR1, and LPDDR2
  • 8-channel direct memory access (DMA) controller
Configuration and Debug
  • Quad Serial Configuration device – EPCQ256 for FPGA
  • On-Board USB Blaster II (mini USB type B connector)
Memory Devices
  • 1GB (2x256MBx16) DDR3 SDRAM on FPGA
  • 1GB (2x256MBx16) DDR3 SDRAM on HPS
  • 64MB QSPI Flash on HPS
  • Mini SD Card Socket on HPS
  • EPCQ256 Flash on FPGA
Communication
  • USB 2.0 OTG (ULPI interface with mini USB type AB connector)
  • USB to UART (mini USB type B connector)
  • 10/100/1000 Ethernet
Connectors
  • One HSMC (8-channel Transceivers, Configurable I/O standards 1.5/1.8/2.5/3.3V)
  • One LTC connector (One Serial Peripheral Interface (SPI) Master ,one I2C and one GPIO interface )
Display
  • 24-bit VGA DAC
  • 128x64 dots LCD Module with Backlight
Audio
  • 24-bit CODEC, Line-in, line-out, and microphone-in jacks
Switches, Buttons and LEDs
  • 8 User Keys (FPGA x4 ; HPS x 4)
  • 8 User Switches (FPGA x4 ; HPS x 4)
  • 8 User LEDs (FPGA x4 ; HPS x 4)
  • 2 HPS Reset Buttons (HPS_RSET_n and HPS_WARM_RST_n)
Sensors
  • G-Sensor on HPS
  • Temperature Sensor on FPGA
Power
  • 12V DC input
Block Diagram of the SoCKit Board


Layout

  • Size:150*110*47 mm

Resources

Getting Help

For further discussion, support, and resources, please go to:
Resources

Documents

TitleVersionSize(KB)Date AddedDownload
How to distinguish the board revision and what's differents. (rev. B/C/D)2542014-09-25
SoCKit User Manual ( rev. D Hardware )1.0.091762014-09-24
SoCKit User Manual ( rev. C Hardware )99982014-07-11
SoCKit User Manual ( rev. B Hardware )62552013-05-30

CD-ROM

TitleVersionSize(KB)Date AddedDownload
SoCKit CD-ROM ( rev. D Hardware )2.0.02014-09-24
SoCKit CD-ROM ( rev. C Hardware )1.0.32014-05-23
SoCKit CD-ROM ( rev. B Hardware )0.0.22013-07-08

Demonstration

TitleVersionSize(KB)Date AddedDownload
SoCKit VIP Demonstration (Source Code)2014-02-21

Linux BSP (Board Support Package): MicroSD Card Image for revD

TitleLinux KernelMin. microSD CapacitySize(KB)Date AddedDownload
Linux Console3.124GB69MB2014-09-23
Linux Console with framebuffer3.124GB103.8MB2014-09-23
Linux LXDE Desktop3.128GB1300MB2014-09-23

Support Daughter Cards

AD/DA Data Conversion Card The AD/DA Data Conversion Card was created to provide a set of Analog to Digital and Digital to Analog interfaces including an Audio CODEC interface. The High Speed Mezzanine Card (HSMC) can be used to develop DSP applications with Altera Development boards and Terasic Development boards (e.g.DE3) that feature the HSMC connector.  


Highspeed AD/DA Card The THDB_ADA (ADA) daughter board is designed to provide DSP solution on DE series and Cyclone III Starter Kit, or other boards with HSMC or GPIO interface.  



HDMI Transmitter Daughter Card HDMI_TX_HSMC is a HDMI transmitter daughter board with HSMC (High Speed Mezzanine Connector) interface. Host boards, supporting HSMC-compliant connectors, can control the HDMI_TX_HSMC daughter board through the HSMC interface. This HDMI_TX_HSMC kit contains complete reference design with source code written in Verilog and C, for HDMI signal transmitting. Based on reference designs, users can easily and quickly develop their applications.  
DVI-HSMC Card The Terasic DVI-HSMC is a DVI transmitter/receiver board with a High Speed Mezzanine Connector (HSMC) interface. It is designed to allow developers to access high quality and high resolution video signals that support UXGA Resolution (Pixel Rates up to 165 MHz). It gives the flexibility required in high resolution image processing systems by combining both the DVI transmitter and receiver onto the same card. Lastly, the DVI-HSMC daughter board can be connected to any HSMC/HSTC interface host boards.   
GPIO-HSTC Card The HTG Card is designed to convert a High-Speed Terasic connector (HSTC) or a High-Speed Mezzanine connector (HSMC) I/Os to three 40-pin expansion prototype connectors, which are compatible with Altera DE3/DE2-115/DE2/DE1/DE0 expansion headers. Users can connect up to three Altera DE3/DE2-115/DE2/DE1/DE0 boards (or associated daughter cards) onto a HSTC/HSMC-interfaced host board via a HTG Card.


Demo

VEEK-MT-SoCKit Demonstration



SoCKit VIP Demonstration

This demo showcases the Cyclone V SOC FPGA communication with ARM in conjunction with the Altera VIP Suite.



Kit Contents


  • SoCKit Board
  • SoCKit Quick Start Guide
  • Power DC Adapter (12V)
  • Ethernet Cat 5e Cable
  • Mini usb cable x2
  • Linear Technology DC934A Demo Board (Bonus)

Order Now



HotLine: 0935.408.286 or 0934 993 253
Skype: linhkienmach
 Email: linhkienmach@gmail.com
Fanpage: Linh Kiện Mạch - Mạch Thí Nghiệm FPGA
Nguồn Terasic

28/11/14

Video and Embedded Evaluation Kit - Multi-touch - Board Thí nghiệm trên FPGA

(Cyclone IV Starter Kit)
  • Mã hàng: P0103.
  • Nhà sản xuất: Terasic. Hàng mới 100%.
  • Xuất sứ: Taiwan.
  • Đơn giá:    (Academic)
  • Liên hệ: 0935 408 286 or 0934 993 253
  • Tên hàng: Video and Embedded Evaluation Kit - Multi-touch 
  • Tấm mạch in đã được lắp ráp hoàn chỉnh dùng cho thiết bị phát triển hệ thống nhúng trên FPGA

Overview



The Video and Embedded Evaluation Kit - Multi-touch (VEEK-MT) is a comprehensive design environment with everything embedded developers need to create processing-based systems. VEEK-MT delivers an integrated platform that includes hardware, design tools, intellectual property (IP) and reference designs for developing embedded software and hardware platform in a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application. The VEEK-MT features the DE2-115 development board targeting the Cyclone IV E FPGA, as well as a capacitive LCD multimedia color touch panel which natively supports multi-touch gestures. A 5-megapixel digital image sensor, ambient light sensor, and 3-axis accelerometer make up the rich feature-set.

Specification

DE2-115 Development Board
Cyclone IV EP4CE115 FPGA
  • 114,480 logic elements (LEs)
  • 432 M9K memory blocks
  • 3,888 Embedded memory (Kbits)
  • 266 Embedded 18 x 18 multipliers
  • 4 General-purpose PLLs
  • 528 User I/Os
Configuration
  • EPCS64 serial configuration device
  • On-board USB-Blaster circuitry
  • JTAG and AS mode configuration supported
Memory Devices
  • 128MB SDRAM
  • 2MB SRAM
  • 8MB FLASH with 8-bit mode
  • 32Kbit EEPROM
Switches and Indicators
  • 18 switches and 4 Push-buttons
  • 18 red and 9 green LEDs
  • Eight 7-segment displays
Audio
  • 24-bit encoder/decoder (CODEC)
  • Line-in, line-out, and 3.5mm jacks
Character Display
  • 16x2 LCD module
On-board Clocking Circuitry
  • Three 50MHz oscillator clock inputs
  • SMA connectors (external clock input/output)
SD Card Socket
  • Provides SPI and 4-bit SD mode for SD card access
Two Gigabit Ethernet Ports
  • Integrated 10/100/1000 Ethernet
172-pin High Speed Mezzanine Card (HSMC)
  • Extension for LCD and camera module
  • Configurable I/O standards (voltage levels: 3.3/2.5/1.8/1.5V)
USB Type A and B
  • Provides host and device controller compliant with USB 2.0 
  • Support for data transfer at full-speed and low-speed
  • PC driver available
40-pin Expansion Port
  • Configurable I/O standards (voltage levels: 3.3/2.5/1.8/1.5V) 
VGA-out Connector
  • VGA DAC (high speed triple DACs) 
DB-9 Serial Connector
  • RS-232 port with flow control
PS/2 Connector
  • PS/2 connector for connecting a PS/2 mouse or keyboard 
Remote Control
  • Infrared receiver module 
TV-in Connector
  • TV decoder (NTSC/PAL/SECAM) 
Power
  • 12V DC input
  • Switching and step-down regulators LM3150MH 
Capacitive LCD Multi-touch Screen
  • 7-inch TFT LCD with pixel resolution of 800*480
  • 16 million colors (8-bit RGB)
  • LED backlight 
5-Megapixel Digital Image Sensor
  • 2,592H x 1,944V active pixels with Bayer color arrangement
  • Programmable frame rate up to 70FPS (VGA)
  • Snapshot-mode mode to take frames on demand
  • Simple two-wire serial control interface
Digital Accelerometer
  • Up to 13-bit resolution at +/- 16g
  • SPI (3- and 4-wire) digital interface
  • Flexible interrupts modes
Ambient Light Sensor
  • Precise illumination measurement under diverse lighting conditions
  • Programmable interrupts
  • 16-bit digital output with I2C fast-mode at 400 kHz 
  • Programmable analog gain and Integration time
  • 50/60Hz lighting ripple rejection 
Layout

  • Size:223*160*47 mm
Resources

Download

Documents

TitleVersionSize(KB)Date AddedDownload
VEEK-MT User manual45172014-05-21
DE2-115 User manual89102010-09-17

CD-ROM

TitleVersionSize(KB)Date AddedDownload
VEEK-MT CD-ROM1.1.02014-05-21

Demonstrations
  • Video and Embedded Evaluation Kit - Multi-touch Camera
  • Video and Embedded Evaluation Kit - Multi-touch Picture Viewer
  • Video and Embedded Evaluation Kit - Multi-touch painter
  • Video and Embedded Evaluation Kit - Multi-touch Digital Accelerometer
  • Video and Embedded Evaluation Kit - Multi-touch VIP
  • Video and Embedded Evaluation Kit - Multi-touch_Selector
  • Video and Embedded Evaluation Kit - Multi-touch_VIP_Camera
  • PS2 Mouse
  • IR Receiver
  • TV Box
  • SD Card Reader
  • SD Card Music Player
  • A Karaoke Machine
  • Music Synthesizer
  • Audio Recording and Playing
  • USB Paintbrush
  • USB Device
  • Web Server
VEEK-MT tools
Video and Embedded Evaluation Kit - Multi-touch​

DE2-115 Control Panel

Allows users to access various components on the DE2-115 platform from a host computer.


DE2-115 System Builder

A powerful tool that comes with the VEEK-MT (originally developed for DE2-115). This tool allows users to create customizable Quartus II projects depending on their requirements for the VEEK-MT. The top-level design file, pin assignments, and I/O standard settings for the DE2-115 board will be generated automatically from this tool. In addition, through the GPIO and HSMC connectors you can select various daughter cards in conjunction with the tPad using the DE2-115 System Builder.


VEEK-MT Sensing Demonstration

This design utilizes an embedded NIOS II cpu to communicate with the on-board digital accelerometer as well as the ambient light sensor. The accelerometer outputs as a level display, and the readings for the ambient light are displayed in the upper left-hand corner.


VEEK-MT Painter Demonstration

This reference design showcases VEEK-MT's sensitive capacitive touch-screen capabilities. Supporting single-paint coordinates and multi-touch gestures, this demonstration allows users to paint with one finger. Gestures that are drawn on the canvas are displayed in the gesture indicator box left of the color palette.


Kit Contents



Demo



Nguồn Terasic

 

Kit Board Mạch Phát Triển Copyright © 2011 -- Template created by O Pregador -- Powered by Blogger