The Artix-7 FPGA is optimized for high performance logic, and offers more capacity, higher performance, and more resources than earlier designs. Artix-7 100T features include:
15,850 logic slices, each with four 6-input LUTs and 8 flip-flops
4,860 Kbits of fast block RAM
Six clock management tiles, each with phase-locked loop (PLL)
240 DSP slices
Internal clock speeds exceeding 450MHz
On-chip analog-to-digital converter (XADC)
The Nexys4 also offers an improved collection of ports and peripherals, including:
16 user switches
USB-UART Bridge
12-bit VGA output
3-axis accelerometer
16Mbyte CellularRAM
Pmod for XADC signals
16 user LEDs
Two tri-color LEDs
PWM audio output
Temperature sensor
Serial Flash
Digilent USB-JTAG port for FPGA programming and communication
Two 4-digit 7-segment displays
Micro SD card connector
PDM microphone
10/100 Ethernet PHY
Four Pmod ports
USB HID Host for mice, keyboards and memory sticks
The Nexys4 is compatible with Xilinx’s new high-performance Vivado ® Design Suite as well as the ISE toolset, which includes ChipScope and EDK. Xilinx offers free “Webpack” versions of these toolsets, so designs can be implemented for no additional cost.
The Nexys4 board is a complete, ready-to-use digital circuit development platform based on the latest Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. With its large, high-capacity FPGA (Xilinx part number XC7A100T-1CSG324C), generous external memories, and collection of USB, Ethernet, and other ports, the Nexys4 can host designs ranging from introductory combinational circuits to powerful embedded processors. Several built-in peripherals, including an accelerometer, temperature sensor, MEMs digital microphone, speaker amplifier and lots of I/O devices allow the Nexys4 to be used for a wide range of designs without needing any other components.
Four double-wide Pmod™ connectors, one VHDC connector
Rugged plastic case, USB cable included
The Nexys™3 digital system development platform features Xilinx's newest Spartan-6 FPGA, 48Mbytes of external memory (including two non-volatile phase-change memories from Micron), and enough I/O devices and ports to host a wide variety of digital systems. The Nexys3 is an ideal platform for any engineer to gain experience with Xilinx's latest technologies, and it is perfectly suited to the classroom - new students can build logic circuits without worrying about complex external interfaces, and more advanced students can build complete digital systems, including controllers, CODECs, and embedded processors.
The on-board Adept™ high-speed USB2 port provides board power, FPGA programming, and user-data transfers at rates up to 38Mbytes/sec. A large collection of low-cost peripheral boards, including more than 30 Pmods™ and several new Vmods™, can add additional features to the Nexys3, including A/D and D/A converters, breadboards, motor drivers, displays, etc. The Nexys3 is fully compatible with all Xilinx tools, including the free WebPack™ as well as Chipscope™, EDK™ (embedded processor design kit) and other tools.
Note: The Nexys3 is no longer in production and is not recommended for new installations. When the current stock is depleted, it will be discontinued.
Tấm mạch in đã được lắp ráp hoàn chỉnh dùng cho thiết bị thiết kế vi mạch FPGA
Nhà sản xuất: Digilent. Hàng mới 100%.
Liên hệ: 0935 408 286 or 0934 993 253
IC:
Xilinx Artix-7™ FPGA (XC7A35T-1CPG236C)
Connector(s):
USB A
USB B-mini
Four 12-pin Pmod™ connectors
VGA
Programming:
Designed exclusively for the Vivado® Design Suite
Features the Artix-7 FPGA : XC7A35T-1CPG236C
33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops)
1,800 Kbits of fast block RAM
Five clock management tiles, each with a phase-locked loop (PLL)
90 DSP slices
Internal clock speeds exceeding 450MHz
On-chip analog-to-digital converter (XADC)
The Basys3 offers an expansive lineup of ports and peripherals to introduce system-level design concepts:
16 user switches
16 user LEDs
5 user pushbuttons
4-digit 7-segment display
4 Pmod connectors
3 Standard 12 pin Pmod
1 dual purpose XADC signal/ standard Pmod
12-bit VGA output
USB-UART Bridge
Serial Flash
Digilent USB-JTAG port for FPGA programming and communication
USB HID Host for mice, keyboards and memory sticks
NOTE: In order to program this board, you will need a A-micro B USB cable. A micro USB cable may be added to the cart at time of checkout for $2.
The Basys3 is an entry-level FPGA board designed exclusively for the Vivado Design Suite, featuring Xilinx Artix 7-FPGA architecture. Basys3 is the newest addition to the popular Basys line of starter FPGA boards. Basys3 includes the standard features found on all Basys boards: complete ready-to-use hardware, a large collection of on-board I/O devices, all required FPGA support circuits, and a free version of development tools and at a student-level price point
Tấm mạch in đã được lắp ráp hoàn chỉnh dùng cho thiết bị thiết kế vi mạch FPGA
Nhà sản xuất: Digilent. Hàng mới 100%.
Liên hệ: 0935 408 286 or 0934 993 253
IC:
Xilinx Spartan 3E FPGA, 100K gates
Connector(s):
USB port
Four 6-pin Pmod connectors
VGA
PS/2
Programming:
JTAG programming via on-board USB2 port using the free Adept Software (version 2.0 or later)
Features:
Xilinx Spartan 3-E FPGA, 100K gates
FPGA features 18-bit multipliers, 72Kbits of fast dual-port block RAM, and 500MHz+ operation
USB 2 full-speed port for FPGA configuration and data transfers (using Adept 2.0 software available as a free download)
XCF02 Platform Flash ROM that stores FPGA configurations indefinitely
User-settable oscillator frequency (25, 50, and 100 MHz), plus socket for a second oscillator
Three on-board voltage regulators (1.2V, 2.5V, and 3.3V) that allow use of 3.5V-5.5V external supplies
8 LEDs, 4-digit seven-segment display, four pushbuttons, 8 slide switches, PS/2 port, and a 8-bit VGA port
Four 6-pin headers for user I/Os, and attaching Digilent Pmod™ accessory circuit boards
Requires Adept 2.0 or later for operation
The Basys2 board is a circuit design and implementation platform that anyone can use to gain experience building real digital circuits. Built around a Xilinx Spartan-3E Field Programmable Gate Array and a Atmel AT90USB2 USB controller, the Basys2 board provides complete, ready-to-use hardware suitable for hosting circuits ranging from basic logic devices to complex controllers. A large collection of on-board I/O devices and all required FPGA support circuits are included, so countless designs can be created without the need for any other components.
Four standard expansion connectors allow designs to grow beyond the Basys2 board using breadboards, user-designed circuit boards, or Pmods (Pmods are inexpensive analog and digital I/O modules that offer A/D & D/A conversion, motor drivers, sensor inputs, and many other features). Signals on the 6-pin connectors are protected against ESD damage and short-circuits, ensuring a long operating life in any environment. The Basys2 board works seamlessly with all versions of the Xilinx ISE tools, including the free WebPack. It ships with a USB cable that provides power and a programming interface, so no other power supplies or programming cables are required.
Note: We have recently released the new Basys 3 which has a number of upgrades and is based on the Xilinx Artix-7™
Tên sản phẩm: Genesys™ Virtex-5 FPGA Development Board
Tấm mạch in đã được lắp ráp hoàn chỉnh dùng cho thiết bị thiết kế vi mạch FPGA
Nhà sản xuất: Digilent. Hàng mới 100%.
Liên hệ: 0935 408 286 or 0934 993 253
IC:
Xilinx Virtex®-5 LX50T FPGA in a 1136-pin BGA package
Connector(s):
Two Vmod™ (high-speed VHDC) connectors
Four 12-pin Pmod™ connectors
Multiple USB2 ports
HDMI video
Audio (line in, line out, microphone & headphone)
Programming:
JTAG programming interfaces compatible with Xilinx's iMPACT and Digilent Adept
Features:
Xilinx Virtex®-5 LX50T FPGA in a 1136-pin BGA package
256Mbyte DDR2 SODIMM with 64-bit wide data
10/100/1000 Ethernet PHY and RS-232 serial port
Multiple USB2 ports for programming, data transfer, and hosting applications
HDMI video with resolution up to 1600x1200 & 24-bit color
AC-97 Codec with 48KHz sampling and line-in, line-out, microphone and headphone ports
Real time power monitors on all power rails
32Mbyte Numonyx® StrataFlash for configuration and user-data storage
100MHz fixed oscillator and (up to) 400MHz programmable clock generator
112 FPGA I/O’s routed to expansion connectors (two high-speed parallel VHDC connectors and four 8-pin headers)
GPIO includes 8 LEDs, 2 buttons, two-axis navigation switch, 8 slide switches, and a 16x2 character LCD
Ships with a 20W power supply, USB cable, and protective plexiglass covers
Digilent’s Genesys™ board brings the power of Xilinx’s Virtex®-5 FPGA to a surprisingly uncomplicated design platform. With gigabit ethernet, high-speed memory, high-resolution audio & video circuits and a host of USB connectivity options, the Genesys board includes proven circuits used in the most demanding designs. From complex systems to dedicated high performance applications, the Genesys board brings workable solutions to complex problems.
Multiple displays (1080p HDMI, 8-bit VGA, 128 x 32 OLED)
I2S Audio CODEC
Target Applications:
Video processing
Motor control
Software acceleration
Linux/Android/RTOS development
Embedded ARM® processing
General Zynq™-7000 AP SoC prototyping
ZedBoard is a low-cost development board for the Xilinx Zynq™-7000 All Programmable SoC (AP SoC). This board contains everything necessary to create a Linux, Android, Windows® or other OS/RTOS based design. Additionally, several expansion connectors expose the processing system and programmable logic I/Os for easy user access.
Take advantage of the Zynq-7000 AP SoC’s tightly coupled ARM® processing system and 7 series programmable logic to create unique and powerful designs with the ZedBoard. The ZedBoard kit is supported by the www.zedboard.org community website where users can collaborate with other engineers also working on Zynq designs.
Kit Includes:
Avnet ZedBoard 7020 baseboard
12 V AC/DC power supply
4 GB SD Card
Micro-USB cable
USB Adapter: Male Micro-B to Female Standard-A
Getting Started Guide
Vivado® Design Suite with device-locked Design Edition license
If you would like an evaluation board for academic purposes, you can apply for a donation through the Xilinx University Program.
Want to master the Xilinx Zynq SoC on your ZedBoard? Take a look at "The ZYNQ Book", an accessible, readable book written for people just starting out with Zynq, as well as engineers already working with Zynq. You can download it free (or purchase a hard copy) at http://www.zynqbook.com/.
The ZYBO offers the following on-board ports and peripherals:
ZYNQ XC7Z010-1CLG400C
512MB x32 DDR3 w/ 1050Mbps bandwidth
Dual-role (Source/Sink) HDMI port
16-bits per pixel VGA output port
Trimode (1Gbit/100Mbit/10Mbit) Ethernet PHY
MicroSD slot (supports Linux file system)
OTG USB 2.0 PHY (supports host and device)
External EEPROM (programmed with 48-bit globally unique EUI-48/64™ compatible identifier)
Audio codec with headphone out, microphone and line in jacks
128Mb Serial Flash w/ QSPI interface
On-board JTAG programming and UART to USB converter
GPIO: 6 pushbuttons, 4 slide switches, 5 LEDs
Six Pmod connectors (1 processor-dedicated, 1 dual analog/digital)
The ZYBO (Zynq Board) is a feature-rich, ready-to-use, entry-level embedded software and digital circuit development platform built around the smallest member of the Xilinx Zynq-7000 family, the Z-7010. The Z-7010 is based on the Xilinx All Programmable System-on-Chip (AP SoC) architecture, which tightly integrates a dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. When coupled with the rich set of multimedia and connectivity peripherals available on the ZYBO, the Zynq Z-7010 can host a whole system design. The on-board memories, video and audio I/O, dual-role USB, Ethernet and SD slot will have your design up-and-ready with no additional hardware needed. Additionally, six Pmod connectors are available to put any design on an easy growth path.
The ZYBO provides an ultra-low cost alternative to the ZedBoard for designers that don't require the high-density I/O of the FMC connector, but still wish to leverage the massive processing power and extensibility of the Zynq AP SoC architecture.
The ZYBO is compatible with Xilinx’s new high-performance Vivado Design Suite as well as the ISE/EDK toolset. These toolsets meld FPGA logic design with embedded ARM software development into an easy to use, intuitive design flow. They can be used for designing systems of any complexity, from a complete operating system running multiple server applications in tandem, down to a simple bare-metal program that controls some LEDs. For systems that require an operating system, Digilent provides an out-of-the-box Linux solution specifically targeted to run on the ZYBO, complete with documentation describing how best to mold it to suite your purposes. These Xilinx tools and Linux solution are all available to use at no additional cost with the ZYBO.
Note: The ZYBO ships without accessories. For users needing more, we offer a ZYBO Accessory Kit that contains:
Voucher for Xilinx Vivado® Design Suite: Design Edition (One full seat, node locked, device-locked to the Zynq-7000 XC7Z010)
4GB Micro SD card
Micro USB cable
5V 2.5A switching power supply
You can bundle an Accessory Kit with your ZYBO at time of purchase for only $20! Additionally, you can purchase a Micro USB cable and 5V power supply from our Accessories category.
Tên sản phẩm: Atlys™ Spartan-6 FPGA Development Board
Tấm mạch in đã được lắp ráp hoàn chỉnh dùng cho thiết bị phát triển hệ thống nhúng trên FPGA.
Nhà sản xuất: Digilent. Hàng mới 100%.
Liên hệ: 0935 408 286 or 0934 993 253
IC: Xilinx Spartan®-6 LX45 FPGA in a 324-pin BGA package Connector(s):
One Vmod™ (high-speed VHDC) connector
One 12-pin Pmod™ connector
One RJ-45 connector for 10/100/1000 Ethernet PHY and RS-232 serial
Two HDMI video input ports & two HDMI output ports
Two on-board USB2 ports for programming & data transfer
AC-97 audio with line-in, line-out, mic, & headphone
Programming:
JTAG programming interfaces compatible with Xilinx's iMPACT™ and Digilent Adept™
Xilinx Spartan-6 LX45 FPGA, 324-pin BGA package
128Mbyte DDR2 16-bit wide data
10/100/1000 Ethernet PHY
On-board USB2 ports for programming & data transfer
USB-UART and USB-HID port (for mouse/keyboard)
Two HDMI video input ports & two HDMI output ports
AC-97 Codec with line-in, line-out, mic, & headphone
Real time power monitors on all power rails
16Mbyte x4 SPI Flash for configuration & data storage
100MHz CMOS oscillator
48 I/O’s routed to expansion connectors
GPIO includes 8 LEDs, 6 buttons, & 8 slide switches
Ships with a 20W power supply and USB cable
The Atlys circuit board is a complete, ready-to-use digital circuit development platform based on a Xilinx Spartan 6 LX45 FPGA. The on-board collection of high-end peripherals, including Gbit Ethernet, HDMI Video, 128Mbyte DDR2 memory array, audio and USB ports make the Atlys board an ideal host for complete digital systems built around embedded processors like Xilinx’s MicroBlaze. Atlys is fully compatible with all Xilinx CAD tools, including ChipScope, EDK, and the free WebPack, so designs can be completed with no extra costs.
The Spartan-6 LX45 is optimized for high-performance logic and offers:
6,822 slices each containing four 6-input LUTs and eight flip-flops
2.1Mbits of fast block RAM
4 clock tiles (8 DCMs & 4 PLLs)
6 phased-locked loops
58 DSP slices
500MHz+ clock speeds
The Atlys board can be communicated with and programmed by the Digilent Adept software. In addition, the board can be programmed by Xilinx's iMPACT using the Digilent Plugin for Xilinx Tools.
The required USB-UART driver is available for free download from Exar.
Linux developers: The Atlys board is supported by PetaLinux SDK for an out-of-the-box embedded Linux solution.