- Mã hàng: P0160.
- Đơn giá: (Academic)
- Liên hệ: 0935 408 286 or 0934 993 253
- Tên hàng: SoCKit - the Development Kit for New SoC Device
- Nhà sản xuất: Terasic. Hàng mới 100%.
- Xuất sứ: Taiwan.
- Tấm mạch in đã được lắp ráp hoàn chỉnh dùng cho thiết bị phát triển hệ thống nhúng trên FPGA
Specification
FPGA Device
- Cyclone V SX SoC—5CSXFC6D6F31C6N
- 110K LEs, 41509 ALMs
- 5140 M10K memory blocks
- 6 FPGA PLLs and 3 HPS PLLs
- 2 Hard Memory Controllers
- 3.125G Transceivers
ARM®-based hard processor system (HPS)
- 800 MHz, A Dual-Core ARM Cortex™-A9 MPCore™ Processor
- 512 KB of shared L2 cache
- 64 KB of scratch RAM
- Multiport SDRAM controller with support for DDR2, DDR3, LPDDR1, and LPDDR2
- 8-channel direct memory access (DMA) controller
Configuration and Debug
- Quad Serial Configuration device – EPCQ256 for FPGA
- On-Board USB Blaster II (mini USB type B connector)
Memory Devices
- 1GB (2x256MBx16) DDR3 SDRAM on FPGA
- 1GB (2x256MBx16) DDR3 SDRAM on HPS
- 64MB QSPI Flash on HPS
- Mini SD Card Socket on HPS
- EPCQ256 Flash on FPGA
Communication
- USB 2.0 OTG (ULPI interface with mini USB type AB connector)
- USB to UART (mini USB type B connector)
- 10/100/1000 Ethernet
Connectors
- One HSMC (8-channel Transceivers, Configurable I/O standards 1.5/1.8/2.5/3.3V)
- One LTC connector (One Serial Peripheral Interface (SPI) Master ,one I2C and one GPIO interface )
Display
- 24-bit VGA DAC
- 128x64 dots LCD Module with Backlight
Audio
- 24-bit CODEC, Line-in, line-out, and microphone-in jacks
Switches, Buttons and LEDs
- 8 User Keys (FPGA x4 ; HPS x 4)
- 8 User Switches (FPGA x4 ; HPS x 4)
- 8 User LEDs (FPGA x4 ; HPS x 4)
- 2 HPS Reset Buttons (HPS_RSET_n and HPS_WARM_RST_n)
Sensors
- G-Sensor on HPS
- Temperature Sensor on FPGA
Power
Block Diagram of the SoCKit Board
- 12V DC input
Layout
- Size：150*110*47 mm
Resources
Getting Help
For further discussion, support, and resources, please go to:
Resources
Documents
| Title | Version | Size(KB) | Date Added | Download |
|---|---|---|---|---|
| How to distinguish the board revision and what's differents. (rev. B/C/D) | 254 | 2014-09-25 |  | |
| SoCKit User Manual ( rev. D Hardware ) | 1.0.0 | 9176 | 2014-09-24 | |
| SoCKit User Manual ( rev. C Hardware ) | 9998 | 2014-07-11 | | |
| SoCKit User Manual ( rev. B Hardware ) | 6255 | 2013-05-30 | |
CD-ROM
| Title | Version | Size(KB) | Date Added | Download |
|---|---|---|---|---|
| SoCKit CD-ROM ( rev. D Hardware ) | 2.0.0 | 2014-09-24 |  | |
| SoCKit CD-ROM ( rev. C Hardware ) | 1.0.3 | 2014-05-23 | | |
| SoCKit CD-ROM ( rev. B Hardware ) | 0.0.2 | 2013-07-08 | |
Demonstration
| Title | Version | Size(KB) | Date Added | Download |
|---|---|---|---|---|
| SoCKit VIP Demonstration (Source Code) |  | 2014-02-21 |  |
Linux BSP (Board Support Package): MicroSD Card Image for revD
| Title | Linux Kernel | Min. microSD Capacity | Size(KB) | Date Added | Download |
|---|---|---|---|---|---|
| Linux Console | 3.12 | 4GB | 69MB | 2014-09-23 |  |
| Linux Console with framebuffer | 3.12 | 4GB | 103.8MB | 2014-09-23 | |
| Linux LXDE Desktop | 3.12 | 8GB | 1300MB | 2014-09-23 | |
AD/DA Data Conversion Card The AD/DA Data Conversion Card was created to provide a set of Analog to Digital and Digital to Analog interfaces including an Audio CODEC interface. The High Speed Mezzanine Card (HSMC) can be used to develop DSP applications with Altera Development boards and Terasic Development boards (e.g.DE3) that feature the HSMC connector.
Highspeed AD/DA Card The THDB_ADA (ADA) daughter board is designed to provide DSP solution on DE series and Cyclone III Starter Kit, or other boards with HSMC or GPIO interface.
HDMI Transmitter Daughter Card HDMI_TX_HSMC is a HDMI transmitter daughter board with HSMC (High Speed Mezzanine Connector) interface. Host boards, supporting HSMC-compliant connectors, can control the HDMI_TX_HSMC daughter board through the HSMC interface. This HDMI_TX_HSMC kit contains complete reference design with source code written in Verilog and C, for HDMI signal transmitting. Based on reference designs, users can easily and quickly develop their applications.
DVI-HSMC Card The Terasic DVI-HSMC is a DVI transmitter/receiver board with a High Speed Mezzanine Connector (HSMC) interface. It is designed to allow developers to access high quality and high resolution video signals that support UXGA Resolution (Pixel Rates up to 165 MHz). It gives the flexibility required in high resolution image processing systems by combining both the DVI transmitter and receiver onto the same card. Lastly, the DVI-HSMC daughter board can be connected to any HSMC/HSTC interface host boards.
GPIO-HSTC Card The HTG Card is designed to convert a High-Speed Terasic connector (HSTC) or a High-Speed Mezzanine connector (HSMC) I/Os to three 40-pin expansion prototype connectors, which are compatible with Altera DE3/DE2-115/DE2/DE1/DE0 expansion headers. Users can connect up to three Altera DE3/DE2-115/DE2/DE1/DE0 boards (or associated daughter cards) onto a HSTC/HSMC-interfaced host board via a HTG Card.
Demo
VEEK-MT-SoCKit Demonstration
SoCKit VIP Demonstration
This demo showcases the Cyclone V SOC FPGA communication with ARM in conjunction with the Altera VIP Suite.
Kit Contents
- SoCKit Board
- SoCKit Quick Start Guide
- Power DC Adapter (12V)
- Ethernet Cat 5e Cable
- Mini usb cable x2
- Linear Technology DC934A Demo Board (Bonus)
Order Now
HotLine: 0935.408.286 or 0934 993 253
Skype: linhkienmach
Nguồn Terasic
